Need help?Do you have a question about the Xantrex XW6048-240-60 and is the answer not in the manual?
General| Model | XW6048-240-60 |
|---|---|
| Rated Output Power | 6000 W |
| Input Voltage | 48 VDC |
| Output Voltage | 240 VAC |
| Frequency | 60 Hz |
| Efficiency | 93% |
| Surge Power | 12000 W |
| Waveform | Pure sine wave |
| Transfer Time | 16 ms |
| Continuous Output Power at 25°C | 6000 W |
| Type | Grid-tie inverter |
| Operating Temperature | -20 to 50°C (-4 to 122°F) |
Details precautions for working with batteries and handling explosive gases from batteries.
Information regarding compliance with FCC rules for digital devices and radio frequency energy.
Describes the core functionalities, modular design, and operational principles of the XW Series Inverter/Charger.
Details the safety feature that prevents harm to utility workers and protects loads from grid fluctuations.
Explains how to monitor the inverter using the Information Panel or System Control Panel.
Guides on reading AC input status, inverter status, charger status, and fault/warning indicators.
Explains how to navigate and interpret data from the System Control Panel's various screens.
Details on viewing System Status, XW Inverter/Charger Home, and Meters screens for operational data.
Provides instructions on accessing and navigating the setup menus for configuration.
Covers configuration of inverter parameters, battery charging, and AC input limits.
Details on configuring grid-tie operations, peak load shaving, and generator support.
Explains settings for operating multiple XW Inverter/Chargers in a networked system.
Provides initial steps for diagnosing problems and identifying system issues.
Offers solutions for common inverter and battery charger operational problems and error codes.
Explains how to interpret warning messages and fault codes and their potential causes and solutions.
Lists detailed electrical performance data including power ratings, voltages, and currents.
Provides physical dimensions, weight, operating temperature, and enclosure type details.
Details default settings and ranges for inverter and charger configuration menus.
Presents default settings for AC, Grid Support, Generator Support, Aux, and Connections menus.
Outlines the terms, conditions, and coverage of the XW Series Inverter/Charger limited warranty.
Explains the procedures for obtaining service, returning products, and out-of-warranty service.
To Next Page