7
2.2 TV Connections2.1 Satellite Dish Connection
Install the digital TV receiver, limited by
the specifications shown in the table
below.
Max. power consumption 28 W when in operation
Size 220 x 35 x 145 mm
Weight 0.6 kg
Operating temperature 32-113 °F, 0-45 °C
Storage temperature 14-158 °F, -10-70 °C
On the rear, this digital TV receiver has
several connectors:
• A satellite dish connector
• AV connectors for a TV and an AV
receiver
• USB ports for removable storage
devices
• An Ethernet port for internet
connection
• A remote control extender connector
The RS-232C port may be used only by an engineer for installation or service.
2 INSTALLATION
Connect the cable from the satellite
dish to LNB IN.
This digital TV receiver has two video
connectors for use by a TV.
• HDMI
• Composite video
Use an HDMI connector to connect
the receiver to a TV for the best picture
quality. If the TV has no available HDMI
connector, use the composite video
connector.
To Next Page
Loading...
