Xerox 3030 - User Manual

PLAIN-PAPER PRODUCTIVITY
WHEN YOU NEED IT...
WHEREYOU NEED IT.
XEROX 3030 ENGINEERING COPIER
The Xerox 3030 Engineering Copier
The Xerox 3030 Engineering Copier is a point-of-need plain-
paper copier that's compact, aesthetically pleasing and
environmentally friendly. The 3030 gives you walk-up
convenience, automatic operation and a clear, easy-to-use
graphic interface.
Copy from original drawings, bluelines, sepias, CAD plots and
cut-and-tape composites onto bond, vellum or film - up to 15
copies from a single feed. Select automatic synchrocut or key in
specific cut length. Make size-for-size copies up to 36 inches
wide by any manageable length at a speed of four D-size copies
per minute.
Roll-fed media loading is quick and easy. There's a manual
bypass for feeding cutsheet media. And our standard copy stacker
and optional document stacker enhance operator efficiency.
Remember, your productivity is directly related to the flow of
engineering information. With the 3030, drawing elements can
be updated via cut-and-tape editing methods to form new
concept drawings quickly, right in the drawing room. Drawings
can be restored to "like new" condition, with the added storage
and handling benefits of plain-paper media. The 3030 gives you
added control of copy quality in terms of contrast and density.
With a 3030 at your point of need, you can make sure the vital
flow of engineering information won't bog down.
•
Point of need convenience
•
Compact and user friendly
•
Improve your productivity

Summary

Document Input Specifications

Maximum Document Size

Specifies the maximum size for single and multicopy modes.

Minimum Document Size

Defines the minimum document size supported.

Document Types

Lists supported document types: opaque, translucent, and transparent.

Document Carrier Recommendation

Recommends a carrier for damaged or delicate documents.

Maximum Document Thickness

Indicates the maximum thickness of documents that can be fed.

Productivity Features

Warm-up Time

Time required for the copier to be ready from a cold start.

First Copy Out Time (FCOT)

Time taken to produce the first copy.

Copy Throughput

Speed of copying in multiple copy mode for different sizes.

Multiple Copies

Selectable number of copies per document.

Media Handling

Supported Media Types

Lists supported media: xerographic bond, vellum, and drafting film.

Media Supply Options

Details roll stock options and manual bypass for cutsheet media.

Physical and Power Specifications

Power Requirements

Specifies the required power connection.

Product Dimensions and Weight

Provides height, width, depth, and weight of the copier.

Installation Space

Recommended space needed for installation.

Key Features and Accessories

Interactive Dual-Language Display

Communicates status and instructions in two languages.

On-board Electronic Auditron

Features account management for 250 individual accounts.

Partial Copy Functionality

Enables reproduction of only required data for efficiency.

Set Mode for Output

Prints are delivered in sequence for easy binding or stapling.

Available Accessories

Lists optional accessories like Work Organizer and Document Stacker.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The Xerox 3030 Engineering Copier is a versatile and user-friendly plain-paper copier designed to enhance productivity in engineering environments. This compact and aesthetically pleasing device offers a convenient solution for reproducing a wide range of engineering documents right where they are needed. Its design prioritizes ease of use, efficiency, and environmental responsibility, making it an ideal tool for managing the flow of engineering information.

Function Description

The primary function of the Xerox 3030 is to produce high-quality, size-for-size copies from various original documents onto different media types. It is capable of copying from original drawings, bluelines, sepias, CAD plots, and even cut-and-tape composites. The copier supports output onto bond paper, vellum, or film, providing flexibility for different application needs. With its ability to make up to 15 copies from a single feed, the 3030 is well-suited for both individual copy tasks and small-batch reproduction.

A key feature is its capacity to handle wide-format documents, allowing for copies up to 36 inches wide by any manageable length. This makes it particularly useful for engineering drawings and plans that often exceed standard paper sizes. The copier operates at a speed of four D-size copies per minute, ensuring efficient turnaround for reproduction tasks.

The 3030 also incorporates advanced features to optimize copy quality. Users have added control over contrast and density, enabling them to restore older or faded drawings to a "like new" condition. This not only improves readability but also facilitates the transition to plain-paper media, which offers better storage and handling benefits compared to traditional bluelines or sepias.

Usage Features

The Xerox 3030 is designed for walk-up convenience and automatic operation, making it accessible to a broad range of users within an engineering setting. Its clear, easy-to-use graphic interface simplifies the copying process, guiding users through various functions with minimal effort.

One of the standout usage features is the ability to select automatic synchrocut or key in specific cut lengths. This allows for precise trimming of copies, reducing waste and ensuring that documents are produced to the exact required dimensions. The copier also supports a "Sets" mode, where prints are delivered in sequence to a conveniently located copy stacker, ready for binding or stapling, which streamlines post-copy processing.

For handling different types of originals, the 3030 is equipped to copy from opaque, translucent, and transparent documents. A manual bypass is available for feeding cutsheet media, offering flexibility beyond the standard roll-fed options. For damaged or very delicate originals, a document carrier (8R3628) is recommended to ensure safe and accurate scanning.

The copier includes an on-board electronic Auditron system, which has a capacity for 250 individual accounts. This system operates in three modes: access control, assigned account, and copy inhibit, providing robust management over copier usage and costs. This is particularly useful in shared environments where tracking and controlling reproduction expenses are important.

Another practical feature is partial copy capability. This allows users to reproduce only the specific data they need from a document, rather than the entire original. By copying only the relevant portion, users can reduce reproduction time and expense, making the process more efficient and cost-effective for particular tasks.

The roll-fed media loading system is designed for quick and easy operation, minimizing downtime and maximizing productivity. The standard copy stacker and an optional document stacker further enhance operator efficiency by organizing output and originals.

Maintenance Features

While the manual primarily focuses on operational aspects, several features contribute to the overall ease of maintenance and longevity of the Xerox 3030. The interactive dual-language message display is a significant maintenance aid. It communicates the status of the copier and provides clear instructions for both operation and maintenance tasks. This proactive communication helps users identify and address issues promptly, reducing the need for specialized technical intervention for common problems.

The design of the 3030, with its emphasis on user-friendliness, suggests that routine tasks such as media loading and clearing minor jams are straightforward. The quick and easy roll-fed media loading, for instance, implies a design that minimizes complexity in a frequently performed task.

The availability of a broad array of media, toner, and consumables from XES, designed to work with all brands of wide-format equipment, ensures that users can easily source compatible supplies. This simplifies the procurement process and helps maintain optimal performance of the copier.

The robust construction and reliable performance of Xerox products, as highlighted in the manual, contribute to reduced maintenance needs over the device's lifespan. The focus on quality copies and reliability, as an industry benchmark, suggests that the 3030 is built to withstand the demands of a busy engineering environment, thereby minimizing unexpected breakdowns and service calls.

In summary, the Xerox 3030 Engineering Copier is a comprehensive solution for engineering document reproduction, offering a blend of advanced functionality, user-centric features, and design considerations that support efficient operation and straightforward maintenance.

Xerox 3030 Specifications