Need help?Do you have a question about the Xerox Color 800 and is the answer not in the manual?
General| Print Speed (Color) | 80 ppm |
|---|---|
| Print Speed (Black) | 80 ppm |
| Print Resolution | 2400 x 2400 dpi |
| Duplex Printing | Automatic |
| Scan Resolution | 600 x 600 dpi |
| Media Sizes Supported | A4, A5, Letter, Legal |
| Maximum Paper Size | 13 x 19 in. |
| Connectivity | USB, Ethernet |
| Network Connectivity | Ethernet |
Step-by-step guide for printing documents from a computer.
Procedure for logging into Administrator mode.
Details Administrator functions like Paper Curl, test prints, and system settings.
Details options affecting paper tray/feed and paper path/transport.
Procedure to select or modify Advanced Stock Setup options.
Detailed steps for cleaning various paper path areas (2, 3, 4, 5, 6, 7).
Lists consumable items and provides replacement procedures.
Step-by-step guide for replacing dry ink/toner cartridges.
Instructions for removing and replacing the dry ink/toner waste bottles.
Procedure for replacing the fuser web assembly.
Procedure for contacting service, including information to provide.
Addresses common issues like no power and incomplete print jobs.
Provides procedures for clearing paper jams in various areas.
Troubleshooting common print quality problems like spots, lines, and smudges.
Lists paper types, sizes, weights, and coating types supported.
Guides for loading paper, tabs, transparencies, and pre-drilled stock.
Troubleshooting tips for clearing OHCF jams and paper jams.
Explains the paper path and decurler settings for curl correction.
Troubleshooting steps for clearing jams in the Interface Module.
Describes the HCS as an optional finishing device and its main components.
Troubleshooting general problems and jam clearance for HCS.
Describes the Perfect Binder and its external components.
Instructions for loading cover stock into the inserter tray.
Instructions for printing jobs from various sources to the binder.
Covers cleaning the binder and emptying the trimmer waste tray.
Troubleshooting paper jams in various binder areas.
Addresses power interruptions and specific fault codes for the binder.
Details binding type, cutting distance, book thickness, and dimensions.
Identifies components like staple cartridge, trays, and covers.
Covers consumable supplies and replacement procedures.
Procedures for replacing standard and booklet maker staple cartridges.
Troubleshooting paper jams in various finisher locations.
Identifies common stapler faults and provides troubleshooting steps.
Procedure to clear staple jams in the standard staple cartridge.
Procedure to clear staple jams in the booklet maker cartridge.
Details specifications for supported paper sizes, weights, and tray capacities.
Describes the optional device used with a booklet maker finisher.
Details the booklet's path through the module for folding and trimming.
Details five pressure options for square folding booklets.
Explains trimmer settings based on booklet characteristics and trim guidelines.
Troubleshooting for jams and faults within the module.
Explains folding options (Bi-Fold, C-Fold, Z-Fold) and paper requirements.
Instructions for loading paper and tabs into the Post-Process Inserter.
Procedure for replacing the staple waste container.
Procedure for emptying the punch waste container.
Troubleshooting paper jams in the Finisher Module and specific areas.
Details tray types, paper sizes, weights, and capacity for the finisher.
To Next Page
