Xerox Color 800 User Manual

Fault codes
If the printing ended abnormally, or a malfunction occurred in the machine, then a fault
code is displayed. If a fault code appears on the machine and it is not listed in the table
below, or if a fault persists after following the listed solution, then contact your Xerox
Customer Support Center. If a fault code is displayed, all print data on the machine as
well as print data stored in the machine’s built-in memory is discarded.
Recommended solutionPossible causeFault code
Open the front doors and verify
that the fuser door is closed.
Power Off/On the machine.
Fuser Drawer is open.010 300
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
Fuser belt speed faults010 310, 010 311, 010 312,
010 313, 010 314, 010 315,
010 316, 010 317, 010 318,
010 319, 010 321, 010 323,
010 324, 010 325, 010 326,
010 327, 010 328, 010 333,
010 334, 010 335, 010 336,
010 337, 010 338, 010 341,
010 342, 010 343, 010 344,
010 347, 010 348, 010 349,
010 350, 010 351, 010 352,
010 353, 010 354, 010 355,
010 356, 010 357, 010 369,
010 370, 010 371, 010 374,
010 379, 010 380, 010 386,
010 387, 010 389
Power Off/On the machine.
If error persists, contact the
Customer Support Center.
A Fuser temperature error or
disconnection
010 360, 010 401
Xerox
®
Color 800/1000 Press
10-24
User Guide
Problem solving

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English