Xerox Color 800 User Manual

Recommended solutionPossible causeFault code
Refer to any user documentation that
came with your DFA device and follow
the instructions to clear the fault
and/or replenish the depleted
supplies.
The DFA device is either
full or out of supplies
051 912
Paper jam in the DFA
device
051 913, 051 914, 051 915
• Refer to any user documentation
that came with your DFA device
and follow the instructions to clear
the fault.
• If necessary, set the correct profile
value; refer to the System
Administration Guide, Profiles
chapter for more information.
• If ncessary, refer to the DFA user
documentation for
setting/changing profile values.
• If necessary, power Off/On the
machine, and if necessary,
resend/restart your print job.
• If the fault persists, contact the
Customer Support Center.
Specifications
This section provides specifications on the Standard Finisher Plus.
Finisher Module specifications
SpecificationItem
Tray Type
• Top Tray: Collated/Uncollated
• Stacker (middle) Tray: Collated/Uncollated (Offset available)
19-41
Xerox
®
Color 800/1000 Press
User Guide
Standard Finisher Plus
(continued)

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English