• Do not place a plastic bag into the tray. This reduces the capacity of the tray and
may cause equipment damage or fault codes to be generated.
• When the trimmer waste tray is full, the printer stops running and a message displays
stating that the bin is full and will resume after it is emptied.
Tip
During larger binding jobs, the trimmer waste tray may require emptying more
frequently.
1. Open the trimmer waste tray.
2. Lift and remove the inside tray/bin.
3. Empty the contents of the tray/bin into a waste container.
4. Visually check to ensure that all scraps are removed from the tray area of the machine.
5. Reinstall the tray/bin into the trimmer waste tray.
6. Gently close the trimmer waste drawer.
Adhesive filling tray
Read the following before performing this procedure:
• The adhesive supply may be replenished while the binder is in operation.
• Use only the specified adhesive for use in the binder. Any other adhesive may result
in binder malfunction.
• Store the adhesive in a cool, well-ventilated area and away from high temperature
and humidity. The adhesive may combust if placed in an area with open flame or
high temperature.
• Do not over-fill the adhesive replenishment hopper; otherwise the covers may not
close properly and adhesive pellets may get into other areas of the binder causing
malfunctions.
Xerox
®
Color 800/1000 Press
16-26
User Guide
Perfect Binder