Paper jams at lever 4b and knob 3a
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Move the lever 4b and turn the knob 3a; remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the lever 4b its original position.
19-23
Xerox
®
Color 800/1000 Press
User Guide
Standard Finisher Plus
To Next Page
Loading...
Need help?
General