When a waste bottle is full, a message appears on the UI advising you when to replace
the bottle. Since there is a second waste bottle, the machine continues to run as long
as that second waste bottle is not full. This allows you to exchange the full bottle with
an empty one while the machine continues to print.
Replacing a dry ink/toner waste bottle
Note
When removing a full dry ink/toner waste bottle, SLOWLY pull it out of the machine.
This will prevent any dry ink/toner from from spilling out of a full waste bottle.
1. Open the dry ink/toner waste bottle panel at the rear of the machine.
2. Grasp the handle of the full bottle and pull it out of the machine.
9-21
Xerox
®
Color 800/1000 Press
User Guide
Maintenance
To Next Page
Loading...
