Xerox Color 800 User Manual

Color shift
Use the 2nd Bias Transfer Roll option when your prints have color shift where the colors
are much different than what you desire. Refer to the following illustration for an example
of prints with and without color shift.
1. No color shift: this is the desired output
2. Color shift: this is an undesired output
If color shift exists, increase one or both of the 2nd BTR values.
Important
Changing the default setting should be considered a temporary solution because
environmental conditions vary from day to day. It is recommended that upon completion
of the print job, you return the option to its default setting.
Xerox
®
Color 800/1000 Press
8-12
User Guide
Advanced Stock Setup

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English