7. Push the staple cartridge unit to its original position in the machine.
8. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Reinserting the standard staple cartridge
Use this procedure if the standard staple cartridge is inserted incorrectly into the machine.
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
Xerox
®
Color 800/1000 Press
17-38
User Guide
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General