Xerox Color 800 User Manual

Note
The default setting is 0. It is recommended that you leave this option at its default
setting until you run test prints and evaluate the output of the prints.
Tip
Changing the default setting should be considered a temporary solution because
environmental conditions vary from day to day. It is recommended that upon completion
of the print job, you return the option to its default setting.
Fold Adjustment Profile
This option allows you to select a desired fold adjustment profile.
Note
This option is available only if your machine has the optional Standard Finisher, Booklet
Maker Finisher, or Standard Finisher Plus attached to it.
From the Fold Adjustment Profile pull-down menu, select the desired profile, as required.
These profiles are preset profiles, which are created and maintained from the Profiles
feature on the UI.
Note
Refer to the Profiles chapter of the System Administration Guide for detailed information.
8-15
Xerox
®
Color 800/1000 Press
User Guide
Advanced Stock Setup

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English