Xerox Color 800 User Manual

12
Offset Catch Tray (OCT)
The OCT receives the completed print job. Output print sets are offset for easy separation.
The maximum capacity of the OCT is 500 sheets of 24 lb. (90 gsm) paper.
Enabling the Offset Mode on the EX Print
Server
Note
This information applies only to users who have the EX Print Server connected to the
print engine.
When printing jobs, if a message displays indicating that the OCT is not offsetting, check
the EX Print Server to ensure that the Offset Mode is enabled. Use the following procedure
to enable the Offset Mode:
1. If necessary, cancel the job from printing.
2. Select the desired job.
3. Open the job Properties.
4. Select the Finishing tab.
5. Ensure that Offset Catch Tray is selected for the Output Tray.
6. Select the Offset Mode (shown with a check mark in the box).
7. Select OK to save and close the Properties window.
8. Resend the print job.
12-1
Xerox
®
Color 800/1000 Press
User Guide

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English