Xerox Color 800 - Finisher Module Problem Solving

Problem solving
Paper jams in the Finisher Module
Paper jams in Tray 8/T1 (Post-Process Inserter)
1. Press the Cover button.
2. Open cover 1e and then remove the jammed paper and all paper loaded in the tray.
Note
If paper is torn, check inside the machine and remove it.
3. Fan the paper you removed, making sure that all four corners are neatly aligned, and
then load them again.
Xerox
®
Color 800/1000 Press
19-14
User Guide
Standard Finisher Plus