7. Select OK to save and close either the New Stock Setup window or the Stock Properties
window.
8. Select Close to exit Manage Stock Library.
Fuser Temperature
This option allows the user to adjust the fuser temperature for specific media types.
Adjusting the fuser temperature allows the machine to maintain the highest productivity
possible when running mixed media jobs, and thereby allows the fuser belt and related
components to be cooled rapidly when switching from heavy-weight paper to
lighter-weight paper.
In order to maintain the highest productivity possible when running mixed media jobs,
the fuser and its related components need to be cooled rapidly when switching from
heavy weight paper to lighter weight paper. The technology of this fuser and its related
components provide this rapid heating and cooling, thereby ensuring the highest
productivity on printed output, especially when running mixed media jobs.
Under most conditions, the fuser temperature is adjusted automatically by the machine
at point of need. On those very rare occasions, however, the user may need to minimally
adjust the fuser temperature for specific stock weights or a specific job flow (such as
running heavy weight cover stock with lighter weight paper).
The Fuser Temperature option allows the user to set the temperature within a range of
-1 degree to +5 degrees Celsius (30.2 - 41.5 degrees Fahrenheit).
Xerox
®
Color 800/1000 Press
8-14
User Guide
Advanced Stock Setup