Xerox Color 800 User Manual

Stock By Name Onlya)
b) Multifeed Detection
c) 2nd Bias Transfer Roll; refer to the Selecting the 2nd Bias Transfer Roll settings
procedure for step-by-step instructions
d) Fuser Temperature
e) Near Empty Detection Level
f) Aligner Roll Pressure
g) Tray Air Assist
h) Fold Adjustment Profile (available only if the optional finisher is attached to your
machine)
5. Select OK to close the Advanced Stock Setup window.
6. Select OK to save and close either the New Stock Setup window or the Stock Properties
window.
7. Select Close to exit Manage Stock Library.
Related Topics:
Stock By Name Only
Multifeed Detection
Near Empty Detection Level
Tray Air Assist
Enable Tray Heater
Aligner Roll Pressure
Second (2nd) bias transfer roll
Fuser Temperature
Fold Adjustment Profile
Selecting the 2nd Bias Transfer Roll settings
Paper tray/paper feed options
Stock By Name Only
When this option is selected/checked (yes or true), stock can be selected from the print
server or from the client’s print driver only by explicitly selecting its specific stock name
(as shown in the Stock Library) and not by matching various parameters (such as weight,
type, and coating). Selecting this option (placing a checkmark in the box) prevents the
inadvertent use of expensive or specialty stocks for slip-sheets, automatic paper selection,
or generic paper requests by the user.
8-5
Xerox
®
Color 800/1000 Press
User Guide
Advanced Stock Setup

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English