Xerox Color 800 User Manual

Staple jams in the standard staple cartridge
Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Grasp the Staple Cartridge handle located at R1, and pull out the staple cartridge
from the finisher.
4. Check the inside of the finisher for any remaining staples, and if necessary, remove
them.
5. Open the staple cartridge unit as shown and remove the jammed staple.
Warning
To avoid injury to your fingers, carefully remove the jammed staples from the
cartridge.
17-35
Xerox
®
Color 800/1000 Press
User Guide
Standard/Booklet Maker Finisher

Xerox Color 800 Specifications

General

Print Speed (Color)	80 ppm
Print Speed (Black)	80 ppm
Print Resolution	2400 x 2400 dpi
Duplex Printing	Automatic
Scan Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, Letter, Legal
Maximum Paper Size	13 x 19 in.
Connectivity	USB, Ethernet
Network Connectivity	Ethernet