Xerox Color 800 - Specifications; Standard;Booklet Maker Finisher

Specifications
Standard/Booklet Maker Finisher
SpecificationItem
Tray Type
• Top Tray: Collated/Uncollated
Note
Transparencies can be sent to the TOP tray of the finisher ONLY.
Transparencies cannot be sent to the stacker (middle) tray.
• Stacker (middle) Tray: Collated/Uncollated (Offset available)
Top Tray:Supported Paper Size
• Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
size)
• Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
• Maximum: 13 x 19 in. (330 x 488 mm), SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Optional C/Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
• Maximum: 13 x 19 in., SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Trays:Supported Paper Weight
• Top Tray: 55-350 gsm
• Stacker (middle) Tray: 55-300 gsm
• Optional C/Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Tray Capacity
• Top Tray: 500 sheets
• Optional C/Z Folder tray: Minimum 30 sheets
*When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5
in. LEF only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
**Tray may not support some paper types.
17-43
Xerox
®
Color 800/1000 Press
User Guide
Standard/Booklet Maker Finisher