Xerox 4110 - Centering Adjustment; Collate

PRINT OPTIONS
19
Centering Adjustment
Use this option to specify how you want the image positioned on the page.
NOTE: Centering Adjustment is available only when Booklet Maker is selected,
Orientation set to Portrait, and Layout set to either 1-up or 2-up.
The following table describes the Centering Adjustment settings:
Collate
Use this option to specify sorting options.
On: Copies of a complete job are sorted as 1-N, 1-N.
Of: Copies of a complete job are sorted as 1,1, 2,2, 3,3.
NOTE: The Collation of Mixed Media and variable data printing jobs is done differently
than other jobs. For mixed media jobs, copies of a complete job are sorted per finishing set.
For variable data printing jobs, copies of a complete job are sorted per record.
Centering setting Image position on page
XY
Positions the image in the center of the page.
Top X
Positions the image flush with the top of the page.
Bottom X
Positions the image flush with the bottom of the page.
Left Y
Positions the image flush with the left side of the page.
Right Y
Positions the image flush with the right side of the page.