EasyManua.ls Logo

Xerox 4127 - User Manual

Xerox 4127
224 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Xerox
®
4112™/4127™
Enterprise Printing Systems
User Guide
Version 3.1
September 2010

Table of Contents

Other manuals for Xerox 4127

Preview: Customer Release Notes
Customer Release Notes8 pages
Preview: Quick Start Guide
Quick Start Guide30 pages

Questions and Answers

  • K
    krobinsonAug 8, 2025
    What to do if my Xerox 4127 power is not switched on?
    • W
      William WattsAug 8, 2025
      First, ensure the power switch on the Xerox printer is turned on. If it is off, turn it on. Next, check if the power cord is properly plugged into the power outlet. If not, turn the power switch off, firmly plug in the power cord, and then turn the power switch back on. Also, verify that the power cord is securely connected to both the machine and the rear of the rack; if disconnected, turn the power switch off, plug the cord in firmly, and then turn the power switch on again.
  • N
    ncochranAug 22, 2025
    Why is my Xerox 4127 display dark?
    • T
      timothyhillAug 22, 2025
      The dark display on your Xerox Printer could be due to the Power Saver mode being active. Try pressing the Power Saver button on the Control Panel to exit this mode. Alternatively, the brightness dial may be set too low. In this case, use the Brightness Dial to increase the display's brightness.

Xerox 4127 Specifications

General IconGeneral
Printer TypeMonochrome Laser
Print Speed127 ppm
Print Speed (Black)127 ppm
Print Resolution1200 x 1200 dpi
Maximum Print Resolution1200 x 1200 dpi
Paper Capacity2, 000 sheets
Duplex PrintingAutomatic
ConnectivityUSB, Ethernet
Network ConnectivityEthernet
Operating System CompatibilityWindows, Mac, Linux

Related product manuals