Problem Solving
7-34 Xerox 4112/4127 EPS
User Guide
Paper Jams Inside Finisher Left Cover
Paper jams at lever 1a and knob 1c
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped and then open the left cover on the finisher.
2. Move lever 1a downwards and turn knob 1c
left. Remove the jammed paper.
Note
If paper is torn, check inside the machine and remove it.
3. Return lever 1a to the original position.
4. Close the Finisher left cover completely. The machine will not operate if the cover is open
even slightly.
To Next Page
Loading...
