Xerox 4127 - Replacing the Staple Waste Container on the Basic Finisher

Maintenance
Xerox 4112/4127 EPS 6-11
User Guide
Replacing the Staple Waste Container on the Basic Finisher
The machine displays a message indicating that the Staple Waste Container is full. To replace
the container:
1. Make sure that the machine has stopped copying and printing, then open the Right Cover
on the finisher.
2. Locate the Staple Waste Container (R5) in the finisher.
3. Grip the container and move the lever to the right; the Unlock position.
4. Remove the container from the finisher.
5. Remove the new container from the packaging. Dispose of the full container in the new
container packaging.