Maintenance
6-12 Xerox 4112/4127 EPS
User Guide
6. Insert the new container into the finisher.
7. Move the lever to the left; the lock position.
8. Close the Right Cover of the finisher.
Replacing the Booklet-Maker Staple Cartridge
The Control Panel displays a message indicating that the Booklet-Maker staple cartridge needs
to be replaced. Use the following procedure to replace the cartridge on this optional finisher.
1. Make sure that the machine has stopped copying and printing, then open the Right Cover
on the finisher.
2. Press the lever to the right and then pull out the Booklet-Maker staple cartridge.
To Next Page
Loading...
