Problem Solving
Xerox 4112/4127 EPS 7-55
User Guide
6. Push the cartridge back to the original position.
7. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Note
If the staples cannot be removed after carrying out the above procedures, contact the
Customer Support Center.
Booklet staple cartridge staple jams
1. Make sure that the machine has stopped printing and then open the front cover on the
light finisher.
2. Pressing the lever to the right, pull out the staple cartridge.
To Next Page
Loading...
Need help?
General