To Next Page
K
krobinsonAug 8, 2025
What to do if my Xerox 4127 power is not switched on?
- WWilliam WattsAug 8, 2025
First, ensure the power switch on the Xerox printer is turned on. If it is off, turn it on. Next, check if the power cord is properly plugged into the power outlet. If not, turn the power switch off, firmly plug in the power cord, and then turn the power switch back on. Also, verify that the power cord is securely connected to both the machine and the rear of the rack; if disconnected, turn the power switch off, plug the cord in firmly, and then turn the power switch on again.
General
