Addendum
Xerox 4112/4127 EPS 9-23
User Guide
Identifying the Components
1. Provides manual control of the various functions of the HCS.
2. Collated sets (up to a total of 5000 sheets) are transported to the Stacker Tray located on a moveable
Stacker Cart.
3. Up to 500 sheets are transported to the Top Tray:
• When sheets are purged after a paper jam.
• When the Sample Set button is selected.
• When selected as an Output Location.Labels must be sent to the Top Tray.
4. Only used when a second stacking/finishing device is installed. This path transports collated sets
through the HCS to a connected finishing device or to another HCS.
1
3
4
2
To Next Page
Loading...
