Problem Solving
7-48 Xerox 4112/4127 EPS
User Guide
Paper jams at booklet output tray
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
light finisher.
2. Turn knob 4a to the right to remove the jammed paper at the booklet output tray.
Note
If paper is torn, check inside the machine and remove it.
3. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
To Next Page
Loading...
Need help?
General