Problem Solving
Xerox 4112/4127 EPS 7-29
User Guide
Paper Jams in Tray 8 (Post-Process Inserter)
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Press the Cover button.
2. Open cover 1e and then remove the jammed paper and all paper loaded in the Post-Process
Inserter.
Note
If paper is torn, check inside the machine and remove it.
3. Fan the paper you removed, making sure that all four corners are neatly aligned, and then
load them again.
4. Push cover 1e until you hear it click into place.
Note
A message will be displayed and the machine will not operate if the cover is open even
slightly.
To Next Page
Loading...
Need help?
General