Problem Solving
Xerox 4112/4127 EPS 7-45
User Guide
3. Return lever 2g to the original position and push back the
tri-fold output tray 2d.
4. Close the Finisher right cover completely. The machine will not operate if the cover is open
even slightly.
Paper jams at unit 4 and knob 4a
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.
1. Make sure that the machine has stopped printing and then open the right cover on the
light finisher.
2. Pull out unit 4.
To Next Page
Loading...
