Xerox 4112/4127 EPS Introduction
Quick Start Guide 1-3
No. Component Function
1 Services Press this button to access the various service screens.
Services may not be available on EPS systems.
2 Control panel Select features with buttons and the keypad.
3 Touch Screen Select the available programming by touching the screen.
4 Job Status Displays the Job Status feature screens.
5 Machine Status Displays the current status of the machine on the touch screen.
6 Energy Saver This button lights when the machine is in the Power Saver
mode. Press this button to exit Power Saver mode.
7 Clear All Clears all programming and returns the machine to its default
settings.
8 Interrupt Temporarily stops the current copy job to allow a priority job to be run.
9 Stop Temporarily stops the current job. Follow the message to cancel or
resume your job.
10 Start Starts the job.
11 Numeric keypad Enter the number of copies, a password, and other numerical values.
12 Clear Deletes numeric values or the last digit entered.
13 Language Changes text to an alternative language.
14 Log In/Out Provides password protected access to the System Administration
menu, which is used to adjust the defaults on the machine.
15 Brightness dial Adjusts the brightness of the Touch screen.
To Next Page
Loading...
Need help?
General