Xerox AltaLink C8045 Customer Expectation & Installation Guide

D E T A I L E D S P E C I F I C A T I O N S A L T A L I N K
®
C 8 0 0 0 S E R I E S
Customer Expectation and Installation Guide 6
Geographies: Eastern Hemisphere :
Europe / Asia / South America / Africa
Electrical
C8030/C8035/
C8045/C8055
C8070
Voltage : 220-240 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%, 10 A
Voltage : 220-240 VAC +/- 10%
Frequency: 50/60 Hz +/- 3%,10 A
Requires use of a 10 ampere outlet which is standard in most modern office buildings. Consult with local service to determine the country specific receptacle
and confirm the existence of this outlet in the proposed installation space.
2.3 meters
2.3 meters
Power
Consumption
C8030
C8035
C8045
C8055
C8070
Running (Average)
115V: 653 watts
230V: 667 watts
115V: 687 watts
230V: 699 watts
115V: 740 watts
230V: 761 watts
115V: 787 watts
230V: 810 watts
115V: 942 watts
230V: 971 watts
Standby Mode
115V: 63 watts
230V: 62 watts
115V: 64 watts
230V: 61.6 watts
115V: 71watts
230V: 70.5 watts
115V: 95 watts
230V: 81.5 watts
115V: 85 watts
230V: 81.6 watts
Low Power Mode
115V: 60 watts
230V: 58 watts
115V: 60 watts
230V: 57 watts
115V: 63 watts
230V: 60 watts
115V: 62 watts
230V: 60 watts
115V: 79 watts
230V: 77 watts
Sleep Mode
115V: 3.53 watts
230V: 3.84 watts
(Default time to Sleep
mode = 2 mins)
115V: 3.54 watts
230V: 3.78 watts
(Default time to Sleep
mode = 2 mins)
115V: 3.78 watts
230V: 3.63 watts
(Default time to Sleep
mode = 2 mins)
115V: 3.34 watts
230V: 3.49 watts
(Default time to Sleep
mode = 2 mins)
115V: 3.59 watts
230V: 3.85 watts
(Default time to Sleep
mode = 2 mins)
Warm up from
Power off
92 seconds
Recovery from Low
Power
2 seconds
Recovery from
Sleep
6.2 seconds
Feature Specifications
Print
C8030
C8035
C8045
C8055
C8070
First Print Out
Time
3
Color / B&W (Sec)
As fast as
6.5/5.3 sec.
As fast as
6.4/5.2 sec.
As fast as
6.5/5.3 sec.
As fast as
6.0/4.7 sec
As fast as
4.7/4.0 sec
Resolution
Up to 1200 x 2400 dpi
Registration
Printing registration specifications for 8.5 x 11” (A4):
 ±1.5 mm (side 1), ±1.9 mm (side 2) along the lead edge
 ±2.0mm (side 1), ±2.4mm (side 2) mm along the side edge from Trays 1-4
 Lead Edge is ±2.2 mm
 Side edge ±3.0 mm for bypass tray
 Skew registration specification from side-to-side feeding for 8.5 x 11” (A4):
 From Tray 1-4 is ±3 mm (side 1), ±4 mm (side 2)
 From Bypass tray skew is ±4 mm.
Max Printable Area
The product will reproduce 11”x17” full color when printing on 12”x18” paper and A3 full bleed when printing on SRA3 paper. The
maximum length images (476.6mm) are only produced on media 19” long. On all media there is a Lead Edge deletion of 4mm and a
Trail Edge deletion of 2mm. The Side Edge deletion varies with paper size. For paper less than 12” wide the Side Edge deletion is 2mm
per edge. For widths greater than 12” the Side Edge deletion is determined by the paper width less the imageable area divided by 2.
Max Image Area: 305mm x 476.6mm (12” x 18.76”)
Guaranteed Image Quality Area: 297mm x 476.6mm (11.69” x 18.76”)
3
The first print out times are measured scanning 8.5x11/A4 document on platen, tray 1 with appropriate color or black mode selected, and delivered to the center
tray with base configuration

Xerox AltaLink C8045 Specifications

General

Print Resolution	Up to 1200 x 2400 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Standard Paper Capacity	1, 140 sheets
Duplex Printing	Automatic
Functions	Print, Copy, Scan, Fax
Memory	4 GB
DADF Capacity	130 sheets
Scan Resolution	Up to 600 x 600 dpi
Fax	Optional
Type	Color Multifunction Printer
Maximum Scan Size	11.7 x 17 inches
Fax Modem Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux
Print Speed	Up to 45 ppm
Connectivity	Ethernet, USB
Supported Paper Sizes	A3, A4, A5, B4, B5
Hard Drive	320 GB
Document Handler	DADF
Paper Weight	60 to 256 gsm
Output Destinations	Email, Network, USB
Copy Speed	Up to 45 ppm color / Up to 45 ppm black-and-white
Network Connectivity	Ethernet 10/100/1000 Base-T