Xerox C235 - Page 137

שומיש תספדמה יטירפתב
Xerox
®
C235 תינועבצ תבלושמ תספדמ
שמתשמל ךירדמ
137
Table 10.1 Advanced Imaging
Menu Item
Description
Color Balance
• Cyan
-5 to 5 (0*)
• Magenta
-5 to 5 (0*)
• Yellow
-5 to 5 (0*)
• Black
-5 to 5 (0*)
• Reset Defaults
Adjust the amount of toner that is used for each
color.
Color Correction
• Color Correction
– Auto*
– Off
– Manual
Color Correction Content
Modify the color settings used to print documents.
• Off sets the printer to receive the color correction
from the software.
• Auto sets the printer to apply different color
profiles to each object on the printed page.
• Manual allows the customization of the RGB or
CMYK color conversions applied to each object on
the printed page.
• Color Correction Content is available only when
Color Correction is set to Manual.
Color Adjust
Calibrate the printer to adjust color variations in the
printed output.
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu Item
Description
Print PS Error
• On
• Off*
Print a page that describes the PostScript error.
Note: When an error occurs, processing of the
job stops, the printer prints an error message,
and the rest of the print job is flushed.
Minimum Line Width
1–30 (2*)
Set the minimum stroke width.
Note: Jobs printed in 4800 CQ use half the
value.
Lock PS Startup Mode
• On*
• Off
Disable the SysStart file.
Note: The default setting varies depending on
the printer model.