Xerox C235 - Page 149

שומיש תספדמה יטירפתב
Xerox
®
C235 תינועבצ תבלושמ תספדמ
שמתשמל ךירדמ
149
Table 10.4 Advanced Imaging
Menu Item
Description
Color Balance
• Cyan - Red
-4 to 4 (0*)
• Magenta - Green
-4 to 4 (0*)
• Yellow to Blue
-4 to 4 (0*)
Adjust the color intensity during scanning.
Contrast
• Best for Content*
• 0
• 1
• 2
• 3
• 4
• 5
Set the contrast of the output.
Background Removal
Level
-4 to 4 (0*)
Adjust the amount of background visible on a
scanned image.
Scan Edge to Edge
• On
• Off*
Allow edge-to-edge scanning of the original
document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Table 10.5 Admin Controls
Menu Item
Description
Automatic Redial
0–9 (5*)
Adjust the number of redial attempts based on the
activity levels of recipient fax machines.
Redial Frequency
1–200 minutes (3*)
Increase the time between redial attempts to
increase the chance of sending fax successfully.
Enable ECM
• On*
• Off
Activate Error Correction Mode (ECM) for fax jobs.
Note: ECM detects and corrects errors in the
fax transmission process caused by telephone
line noise and poor signal strength.
Enable Fax Scans
• On*
Fax documents that are scanned at the printer.