168
Xerox
®
C235 תינועבצ תבלושמ תספדמ
שמתשמל ךירדמ
Setup On Printer Panel
•
Choose Network
•
Add Wi-Fi Network
–
Network Name
–
Network Mode
Infrastructure
•
Wireless Security Mode
–
Disabled*
–
WEP
–
WPA2/WPA - Personal
–
WPA2 - Personal
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection
Setup in the Embedded Web Server.
Wi-Fi Protected Setup
•
Start Push Button Method
•
Start PIN Method
Establish a wireless network and enable network security.
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings of
the access point.
Compatibility
•
802.11b/g/n (2.4GHz)
•
802.11a/b/g/n/ac (2.4GHz/5GHz)*
•
802.11a/n/ac (5GHz)
Specify the wireless standard for the wireless network.
Wireless Security Mode
•
Disabled*
•
WEP
•
WPA2/WPA-Personal
•
WPA2-Personal
•
802.1x - RADIUS
Set the type of security for connecting the printer to wireless
devices.
WEP Authentication Mode
•
Auto*
•
Open
•
Shared
Set the type of Wireless Encryption Protocol (WEP) used by the
printer.
Note: This menu item appears only if Wireless Security
Mode is set to WEP.
Specify a WEP password for secure wireless connection.
Note: This menu item appears only if Wireless Security
Mode is set to WEP.
Enable wireless security through WPA2.
Note: This menu item appears only if Wireless Security
Mode is set to WPA2-Personal.
Set the password for secure wireless connection.