Xerox
®
C235 תינועבצ תבלושמ תספדמ
שמתשמל ךירדמ
PCL SmartSwitch
•
Off
•
On*
Set the printer to switch to PCL emulation when a
print job received through a USB port requires it,
regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the
printer does not examine incoming data and
uses the default printer language specified in
the Setup menu.
PS SmartSwitch
•
Off
•
On*
Set the printer to switch to PS emulation when a
print job received through a USB port requires it,
regardless of the default printer language.
Note: If PS SmartSwitch is off, then the
printer does not examine incoming data and
uses the default printer language specified in
the Setup menu.
Mac Binary PS
•
On
•
Auto*
•
Off
Set the printer to process Macintosh binary PostScript
print jobs.
•
When set to On, the printer processes raw binary
PostScript print jobs from computers using the
Macintosh operating system.
•
When set to Auto, the printer processes print jobs
from computers using either Windows or
Macintosh operating systems
•
When set to Off, the printer filters PostScript print
jobs using the standard protocol.
Enable USB Port
•
Disable
•
Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
Restrict external network access
Restrict external network access
•
Off*
•
On
Restrict access to network sites.
Specify the network addresses with restricted access.
E-mail address for notification
Specify an e-mail address to send a notification of
logged events.
To Next Page
Loading...
