Job Status
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
189
Releasing a Secure Print
1. At the control panel, press the Job Status button.
2. Touch the Secure Print tab.
3. Touch the folder that holds the print job.
4. Enter the passcode number that you assigned to the print job by using the keypad and touch OK.
5. Touch the corresponding print job in the list, then touch Release.
Deleting a Secure Print
1. At the control panel, press the Job Status button.
2. Touch the Secure Print tab.
3. Touch the folder that holds the print job.
4. Enter the passcode number that you assigned to the print job by using the keypad and touch OK.
5. Touch the corresponding print job in the list, then touch Delete.
Completed Jobs
This option displays the jobs, have been completed on the printer. Up to 150 jobs can be displayed.
The Owner, Name, and Status of each job are shown.
1. Press the Job Status button on the control panel.
2. The Active Jobs list is displayed.
3. Touch Completed Jobs.
4. The list of completed jobs is displayed.
5. Use the Up and Down buttons to scroll the jobs in the list.
6. To view the details of a completed job, touch the job.
7. The job details are displayed.
8. Touch Close to exit the Job Details screen.
Tou ch All Jobs to filter the jobs and display only Copy, Print and Fax Received Jobs or Scan Jobs and
Fax Sent Jobs that have been completed.
Managing Jobs
Manage the Active Jobs by using Job Commands.
•Press the Job Status button on the control panel.
The Active Jobs list is displayed.
• To access Job Commands, highlight the required job in the list.
The job command buttons are available depending on the selected job.
• The following options are available:
To Next Page
Loading...
Need help?
General
