Xerox Phaser 6110MFP User Manual

Installing Printer Software in Windows
6
NOTE : If your printer is not already connected to the
computer, the following window will appear.
• After connecting the printer, click
Next .
• If you don’t want to connect the printer at this time, click
Next , and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
5 Select the components to be installed and click Next .
NOTE : You can change the desired installation folder by
clicking [ Browse ].
6 After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click
Next .
Otherwise, just click
Next and skip to step 9.
7 If the test page prints out correctly, click Yes .
If not, click
No to reprint it.
8 Click Finish .
Removing Printer Software
1 Start Windows.
2 From the Start menu select Programs or All Programs →
your printer driver name → Maintenance .
3 Select Remove and click Next .
You will see a component list so that you can remove any
item individually.
4 Select the components you want to remove and then click
Next .
5 When your computer asks you to confirm your selection,
click
Yes .
The selected driver and all of its components are removed
from your computer.
6 After the software is removed, click Finish .

Xerox Phaser 6110MFP Specifications

General

Brand	Xerox
Model	Phaser 6110MFP
Category	All in One Printer
Language	English