Need help?Do you have a question about the Xerox Phaser 8860 and is the answer not in the manual?
General| Brand | Xerox |
|---|---|
| Model | Phaser 8860 |
| Category | All in One Printer |
| Language | English |
Details the purpose, scope, and usage of the service manual for the system.
Describes the structure and content of each section within the service manual.
Provides essential safety precautions related to the electrical power source and handling.
Summarizes critical safety guidelines for servicing the system and its components.
Instructions and warnings for safely moving the printer unit, including cooldown and restraints.
Explains warning symbols, cautions, notes, and common safety icons used in the documentation.
Guidelines to prevent damage to electronic components from static electricity during handling.
Details FCC (US) and ICES-003 (Canada) compliance for electromagnetic emissions.
Provides a general description of the Phaser 8860/8860MFP printer and its capabilities.
Lists standard features and available configurations for the Phaser 8860/8860MFP.
Identifies and illustrates the external parts of the 8860MFP model.
Details the layout and functions of the 8860MFP control panel buttons and display.
Identifies and illustrates the external parts of the 8860 model.
Details the layout and functions of the 8860 control panel buttons and display.
Provides a visual guide to the printer's menu structure and options.
Lists the technical and physical specifications for the Phaser 8860/8860MFP.
Outlines the systematic steps a technician should follow during a service call.
Steps to gather information and identify the reason for the service call before proceeding.
Details routine maintenance tasks to be performed during service calls.
Provides general cleaning procedures to be performed at every service call.
Steps to complete after service, including cleaning, customer training, and verification.
Explains the Power On Self Test (POST) and related error messages and LED codes.
Details the procedure for resetting NVRAM and lists parameters affected by the reset.
Provides guidance on troubleshooting problems indicated by control panel error messages.
Troubleshooting steps for errors related to the 525-Sheet Feeder.
Troubleshooting steps for program faults in the 525-Sheet Feeder.
Troubleshooting steps for errors related to the I/O Board.
Troubleshooting steps for program faults in the I/O Board.
Troubleshooting steps for errors related to the Configuration Card.
Troubleshooting steps for IPC program faults, likely firmware communication errors.
Troubleshooting steps for errors related to process control, like temperature issues.
Troubleshooting steps for faults related to incorrect Wiper Blade alignment.
Troubleshooting steps for faults where the Drum does not reach its home position.
Troubleshooting steps for program faults in process control systems.
Troubleshooting steps for faults within the Y-Axis sub-system.
Troubleshooting steps for program faults in the Y-Axis sub-system.
Troubleshooting steps for faults related to the X-Axis motor or drive.
Troubleshooting steps for program faults associated with the X-Axis system.
Troubleshooting steps for faults related to the Process Drive.
Troubleshooting steps for faults with the Head Tilt Solenoid.
Troubleshooting steps for Process Drive faults, particularly during printhead tilting.
Troubleshooting steps for Printhead tilt faults, indicating improper tilt engagement.
Troubleshooting steps for faults where the printhead is not properly restrained.
Troubleshooting steps for process faults, including stuck or mispositioned printheads.
Troubleshooting steps for program faults detected during operation.
Troubleshooting steps for software errors related to wiper or media drive faults.
Troubleshooting steps for program faults associated with the media drive system.
Troubleshooting steps for errors related to the ink loader operation.
Troubleshooting steps for communication errors involving the electronics module.
Troubleshooting steps for temperature sensitivity issues with the power supply.
Troubleshooting steps for software errors related to EMC motor control.
Troubleshooting steps for program faults detected in the system.
Troubleshooting steps for thermal errors detected in the printhead.
Troubleshooting steps for thermal errors occurring in the system.
Troubleshooting steps for thermal errors detected in the drum assembly.
Troubleshooting steps for errors related to the drum temperature sensor.
Troubleshooting steps for thermal errors occurring in the preheater.
Troubleshooting steps for thermal errors in the printhead jetstack.
Troubleshooting steps for thermal errors in the printhead jetstack.
Troubleshooting steps for thermal errors related to the printhead reservoir.
Troubleshooting steps for thermal errors occurring in the ink loader.
Troubleshooting steps for program faults related to thermal conditions.
Troubleshooting steps for faults related to printhead calibration.
Troubleshooting steps for program faults related to waveform generation.
Troubleshooting steps for firmware version mismatches between diagnostics and engine.
Troubleshooting steps for general jam faults detected in the DADF.
Troubleshooting steps for errors detected in the NVRAM.
Troubleshooting steps for errors related to RAM DIMM failures.
Troubleshooting steps for general printing process errors.
Troubleshooting steps for errors related to the profile library.
Troubleshooting steps for software errors related to the jam manager.
Troubleshooting steps for jams occurring during mechanical initialization.
Troubleshooting steps for program faults detected during operation.
Troubleshooting steps for faults with the Tray 1 width sensor.
Troubleshooting steps for errors accessing Printhead NVRAM.
Troubleshooting steps for ink level sense over-range faults, often due to contamination.
Troubleshooting steps for errors positioning the drum maintenance kit.
Troubleshooting steps for errors in the drum maintenance drive.
Troubleshooting steps for errors related to the drum maintenance kit installation.
Troubleshooting steps for heating errors within the PEST system.
Troubleshooting steps for fan errors within the PEST system.
Troubleshooting steps for errors related to the 50V power supply.
Troubleshooting steps for heating errors related to PEST clutches or solenoids.
Troubleshooting steps for errors related to the Tray 2 Lift Motor.
Troubleshooting steps for errors related to the purge pump.
Troubleshooting steps for errors related to the relay board.
Troubleshooting steps for errors related to the X-Axis motor.
Troubleshooting steps for errors related to the Y-Axis motor.
Troubleshooting steps for errors related to the media drive assembly.
Troubleshooting steps for errors related to the process drive motor.
Troubleshooting steps for errors related to the power supply.
Troubleshooting steps for scanner subsystem test failures.
Troubleshooting steps for scanhead lock or shipping restraint errors.
Troubleshooting steps when the scanner assembly is not detected.
Troubleshooting steps when the DADF is not detected.
Troubleshooting steps for DADF DRAM or Optical self-test errors.
Troubleshooting steps for media jams detected in the DADF.
Troubleshooting steps for calibration faults detected in the DADF.
Provides a key and troubleshooting information for various jam codes.
Guides users to identify the source of an imaging defect and select the correct RAP.
Troubleshooting steps for dark streaks appearing on copied images from the DADF.
Troubleshooting steps for voids appearing in copied images from the DADF.
Troubleshooting steps for skewed copy images originating from the DADF.
Troubleshooting steps for fuzzy text or images originating from the DADF.
Troubleshooting steps for copy image brightness issues from the DADF.
Troubleshooting steps for color discrepancies in copied images from the DADF.
Troubleshooting steps for fuzzy text or images originating from the DADF.
Troubleshooting steps for random light stripes originating from the Print Engine.
Troubleshooting steps for predominant light stripes from the Print Engine.
Troubleshooting steps for smudges or smears originating from the Print Engine.
Troubleshooting steps for printed images that are too light or too dark.
Troubleshooting steps when no image is printed, but paper is processed.
Troubleshooting steps for uneven or incorrect colors from the Print Engine.
Troubleshooting steps for streaks or lines appearing on the print.
Troubleshooting steps for scratches or marks parallel to the print axis.
Troubleshooting steps for ink appearing on blank areas of the printed page.
Troubleshooting steps for fuzzy text, often due to drum thermal issues or X-Axis errors.
Troubleshooting steps for poor primary color fills, often caused by obstructed jets.
Troubleshooting steps for ghosting, caused by stacked prints or drum issues.
Troubleshooting steps for poor text resolution due to drum thermal or X-Axis drive issues.
Troubleshooting steps for wavy or ill-formed vertical lines from the Print Engine.
Troubleshooting steps for oil streaks on prints, often due to drum oiling.
Troubleshooting steps for incomplete image transfer, often due to media or drum issues.
Troubleshooting steps for ink smears on the first side of duplex prints.
Troubleshooting steps for repeating defects caused by imaging component issues.
Troubleshooting steps for white stripes caused by X-Axis Drive malfunctions.
Troubleshooting steps for wrinkling, often seen on short-grain media or duplex prints.
Troubleshooting steps for image offset or cut-off issues.
Troubleshooting steps for poor ink adhesion or image durability.
Troubleshooting steps for significant jet loss, often due to ink starvation.
Guidance on selecting and analyzing test prints for diagnostics.
Describes how to substitute adjacent jets for weak or missing jets to improve quality.
Provides general procedures and notes for part removal and reassembly.
Procedure for removing the front door and Tray 1 assembly.
Procedure for removing the output tray assembly from the 8860MFP.
Procedure for removing the left side cover assembly from the 8860MFP.
Procedure for removing the scanner hinges from the 8860MFP.
Procedure for removing the control panel assembly from the 8860MFP.
Procedure for removing the scanner assembly from the 8860MFP.
Procedure for removing the DADF front cover assembly from the 8860MFP.
Procedure for removing the DADF assembly from the 8860MFP.
Procedure for removing the DADF hinge assemblies from the 8860MFP.
Procedure for removing the rear cover assembly from the 8860MFP.
Procedure for removing the right side cover assembly from the 8860MFP.
Procedure for removing the control panel cover for the 8860 model.
Procedure for removing the control panel assembly for the 8860 model.
Procedure for removing the exit cover assembly for the 8860 model.
Procedure for removing the ink loader assembly for the 8860 model.
Procedure for removing the left side cover assembly for the 8860 model.
Procedure for removing the right side cover assembly for the 8860 model.
Procedure for removing the ink loader assembly for the 8860MFP model.
Procedure for removing and replacing the printhead assembly.
Procedure for removing and replacing the drum assembly.
Procedure for removing and replacing the Y-Axis belt.
Procedure for removing and replacing the printhead wiper blade and belt.
Procedure for removing and replacing the purge pressure pump.
Procedure for removing and replacing the printhead restraints.
Procedure for removing and replacing the transfix camshaft.
Procedure for removing and replacing the drum maintenance camshaft.
Procedure for removing and replacing the stripper carriage assembly.
Procedure for removing and replacing the transfix roller.
Procedure for removing and replacing the Y-Axis spring.
Procedure for removing and replacing the transfix load module.
Procedure for removing and replacing the drum maintenance pivot plate.
Procedure for removing and replacing the preheater and deskew assembly.
Procedure for removing and replacing the X-Axis bias spring.
Procedure for removing and replacing the preheater lift solenoid.
Procedure for removing and replacing the inner simplex guide.
Procedure for removing and replacing the lower duplex guide.
Procedure for removing and replacing the take away roller.
Procedure for removing and replacing the duplex roller.
Procedure for removing and replacing the upper duplex guide and solenoid.
Procedure for removing and replacing the outer duplex guide.
Procedure for removing and replacing the exit module for the 8860MFP.
Procedure for removing and replacing the system stabilizer.
Procedure for removing and replacing the pick and retard rollers.
Procedure for removing and replacing the exit module for the 8860 model.
Procedure for removing and replacing the scanner power supply fan.
Procedure for removing and replacing the head maintenance clutch.
Procedure for removing and replacing the X-Axis motor.
Procedure for removing and replacing the drum fan.
Procedure for removing and replacing the process drive assembly.
Procedure for removing and replacing the exit roller motor.
Procedure for removing and replacing the exit elevator motor.
Procedure for removing and replacing the Tray 2 lift motor gear.
Procedure for removing and replacing the Y-Axis motor assembly.
Procedure for removing and replacing the Tray 1 pick solenoid.
Procedure for removing and replacing the Tray 2 lift motor.
Procedure for removing and replacing the media drive assembly.
Procedure for removing and replacing the electronics module cooling fan.
Procedure for removing and replacing the head tilt gear.
Procedure for removing and replacing the fax speaker.
Procedure for removing and replacing the head tilt solenoid.
Procedure for removing and replacing the exit module control board.
Procedure for removing and replacing the scanner power supply.
Procedure for removing and replacing the wave amplifier.
Procedure for removing and replacing the electronics module assembly.
Procedure for removing and replacing the hard drive.
Procedure for removing and replacing RAM modules.
Procedure for removing and replacing NVRAM devices.
Procedure for removing and replacing the I/O board.
Procedure for removing and replacing the drum heater relay board.
Procedure for removing and replacing the back frame assembly.
Procedure for removing and replacing the FDI board.
Procedure for removing and replacing the scanner detect sensor.
Procedure for removing and replacing front/exit door interlock switches.
Procedure for removing and replacing the drum temperature sensor.
Procedure for removing and replacing the waste tray detect sensor.
Procedure for removing and replacing the paper size switch.
Procedure for removing and replacing the no paper sensor.
Procedure for removing and replacing the paper height sensor.
Procedure for removing and replacing the output tray full sensor.
Procedure to calibrate the DADF to the scanner assembly.
Procedure to place the printhead in a parked position for service.
Procedure to set the printhead wiper blade alignment.
Procedure to place the process drive in its home position.
Procedure to home the head tilt gear and printhead.
Explains how to use the parts list and defines terms like 'Assembly'.
Describes the format and location of the product serial number.
Part list for the 8860MFP covers.
Part list for the 8860 covers.
Part list for imaging components such as printhead, drum, and ink loader.
Part list for the 8860MFP paper path components.
Part list for the 8860 paper path components.
Part list for the 8860MFP drive system components.
Part list for the 8860 drive system components.
Part list for the 8860MFP electrical components.
Part list for the 8860 electrical components.
Part list for sensors and actuators used in the system.
Lists available Xerox supplies, kits, and options.
Details the sequence of events during system power-on and initialization.
Provides access to information pages and tests for diagnosing system malfunctions.
Explains the use of built-in diagnostics for troubleshooting system components.
Describes tests to measure print engine component parameters and verify operation.
Provides procedures for troubleshooting problems not associated with error codes.
Guides for troubleshooting electrical issues, including power supply and module failures.
Troubleshooting steps for DADF issues like lamp not turning on or media not feeding.
Troubleshooting steps for issues with scanhead movement or the scanner lamp.
Troubleshooting steps for control panel issues like not responding or being blank.
Troubleshooting steps for inoperative exit module elevator.
Guides for diagnosing and resolving paper path and media transport issues.
Troubleshooting steps for issues related to the operating system or applications.
Troubleshooting steps for issues related to network connectivity and configuration.
Procedure for testing the system's USB port functionality.
Provides procedures for common fax operation problems.
Troubleshooting steps for situations where the remote fax machine does not ring.
Troubleshooting steps when remote fax answers but transmission fails.
Troubleshooting steps when the system does not answer incoming calls.
Troubleshooting steps when fax answers but transmission fails.
A checklist to guide troubleshooting of printhead problems before replacement.
Describes the process for performing a printhead cleaning cycle.
Instructions on how to use the P/J locator diagrams to find connections.
Diagrams showing the locations of plugs and jacks on various system components.
Illustrations showing how various wire harnesses are routed within the system.
Block diagrams illustrating the system's electrical connections and data flow.
Describes the major subsystems of the Phaser 8860MFP.
Details the DADF and Scanner Assembly, including their components and functions.
Explains the controller boards, power supply, and module functions.
Describes the nine major subsystems of the print engine.
To Next Page