Xerox Phaser 8860 - REP 5.0.7 Hard Drive

09/2007
4-66
Phaser 8860/8860MFP Service Manual
REP 5.0.7
Initial Issue
Repairs and Adjustments
REP 5.0.7 Hard Drive
Parts List on PL 5.0
Removal
1. Loosen the thumbscrews on the back cover of the Electronics Module.
2. Disconnect the Hard Drive from the Electronics Module.
Figure 1 Removing the Hard Drive
Replacement
1. Connect the replacement drive and close the Back Cover.
Figure 2 Replacing the Hard Drive