Xerox Phaser 6110MFP User Manual

Using Your Printer with a Macintosh
30
Install the Scan driver
1 Make sure that you connect your printer to the computer.
Turn on your computer and printer.
2 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
3 Double-click CD-ROM icon that appears on your
Macintosh desktop.
4 Double-click the MAC_Installer folder.
5 Double-click the MAC_Twain folder.
6 Double-click the Xerox Scan Installer icon.
7 Enter the password and click OK .
8 Click Continue .
9 Click Install .
10 Click Continue .
11 After the installation is finished, click Quit .
Uninstalling the Scan driver
1 Insert the CD-ROM which came with your printer into the
CD-ROM drive.
2 Double-click CD-ROM icon that appears on your
Macintosh desktop.
3 Double-click the MAC_Installer folder.
4 Double-click the MAC_Twain folder.
5 Double-click the Xerox Scan Installer icon.
6 Enter the password and click OK .
7 Click Continue .
8 Select Uninstall from the Installation Type and then Click
Uninstall .
9 Click Continue .
10 When the uninstallation is done, click Quit .
Setting Up the Printer
For a USB-connected Macintosh
1 Follow the instructions on “Installing Software for
Macintosh” on page 29 to install the PPD and Filter files on
your computer.
2 Open Print Setup Utility from the Utilities folder.
3 Click Add on the Printer List .
4 Select the USB tab.
5 Select Xerox in Printer Model and your printer in Model
Name
.
6 Click Add .
Your printer appears on the
Printer List , and is set as the
default printer.

Xerox Phaser 6110MFP Specifications

General

Brand	Xerox
Model	Phaser 6110MFP
Category	All in One Printer
Language	English