Phaser® 6180MFP Multifunction Printer
EN - 4
Macintosh Network Installation
Installing the Address Book Editor and Express Scan
Manager (USB Only)
1. Click Install Utilities.
2. Click Install Fax/Scan Utilities, and then click Next.
3. Select your language, and then click Next.
4. When asked to continue, click Next.
5. Select I Accept if you accept the Xerox License Agreement, and
then click Next.
6. Choose the destination folder, and then click Next.
7. When the installation is complete, click Finish.
Note: If you have not already installed PrintingScout Software, see
Installing PrintingScout Software on page 2.
Continue with the section Setting Up the Printer Features Connecting
over USB on page 10.
Macintosh Network Installation
Insert the Software and Documentation CD-ROM. Run the
VISE installer to completion.
Macintosh OS X 10.2.x and 10.3.x (Bonjour/Rendezvous)
1. Open the Print Setup Utility.
2. To add your new printer, click Add.
3. Select Rendezvous from the drop-down menu.
4. Select the printer in the printer’s window.
5. Select Xerox from the list of manufacturers in the Printer Model
lower drop-down menu.
6. Select the Phaser 6180MFP from the list of available printers.
7. Click the Add button.
Macintosh OS X 10.4.x and Higher (Bonjour)
1. Open the Printer Setup Utility.
2. Click the Add button.
3. Click the Default Browser button.
4. Select the Bonjour connected printer.
5. Click the Add button.
To Next Page
Loading...
Need help?
General
