User Safety Summary
Phaser® 7300 Color Printer 16
■ The printer is heavy, and must be lifted by three people. The illustration below shows the proper
technique for lifting the printer.
Note
Do not use the Multi-Purpose Tray or Left Side Output Tray to lift the printer.
■ Follow the recommended procedure when moving the printer from one location to another. You
can find this procedure in the Moving Guide printable page located in the Setup Guide on the
Interactive Documentation CD-ROM.
■ Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a warning symbol. These
areas may be very hot and could cause personal injury.
■ Wait 10-15 seconds between switching the printer off and on.
■ Keep hands, hair, neckties, etc., away from the exit and feed rollers.
68 kg
149 lbs.
7300-53
To Next Page
Loading...
Need help?
General