Xerox PHASER 7500 Series

www.zinetic.co.uk
www.zinetic.co.uk email: sales@zinetic.co.uk
INSTRUCTIONS FOR REFILLING XEROX PHASER 7500 SERIES
The toner cartridge is basically a plastic tube - containing toner and a chip. The cartridge can be refilled as
many times as you want.
Before you begin
Please read instructions from start to finish,
before you start your refill.
Protect your work surface with old newspaper to
catch any waste toner spills.
When should I refill?
Toner Low – IGNORE AND KEEP PRINTING.
When you cannot print then it is time to empty and
refill the cartridge indicated.
Turn off your printer.
Remove only the EMPTY toner cartridge from
printer.
Place the printer cartridge on several sheets of
newspaper to catch any toner spills.

Xerox PHASER 7500 Series Specifications

General

Print Technology	Laser
Monthly Duty Cycle	Up to 150, 000 pages
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	Ethernet 10/100Base-TX, USB 2.0
Media Sizes	A4, A5, B5
Weight	53 kg
PDL	PCL 5c, PCL 6, Adobe PostScript 3
Print Speed	Up to 35 ppm

Summary

Getting Started and Preparation

Pre-Refill Instructions

Read all instructions before starting and protect your workspace from toner spills.

When to Refill

Refill when the printer stops printing, not just when 'Toner Low' appears.

Cartridge Preparation and Toner Removal

Accessing the Toner Refill Port

Locate and carefully slide off the plastic cover hiding the toner refill hole.

Emptying Old Toner

Shake out remaining toner into a sealable bag, taking care to avoid spills.

Refilling the Cartridge with New Toner

Toner Filling Procedure

Prepare toner bottle, insert spout, and pour toner slowly into cartridge for about 5 minutes.

Completing the Refill and Chip Replacement Stage

Finishing Toner Refill

Gently squeeze toner bottle, remove it, and replace the plastic cover correctly.

Introduction to Chip Replacement

Stage 2 covers replacing the reset chip, which is held by two locking tabs.

Chip Replacement Procedure

Releasing and Removing the Chip

Release the chip by depressing plastic clips from front or behind, then slide it out.

Refitting the New Chip

Slide the new chip into place, ensuring the clips re-engage to secure it.

Safety Information and Disclaimers

Toner Handling and Health Precautions

Treat toner as dust, avoid inhalation, eye/skin contact, and ingestion. Consult doctor if needed.

Disclaimer of Warranty and Liability

Information is for guidance; Zinetic disclaims warranty and user is responsible for compliance.