Xerox Phaser 7400 Supplementary Guide

The areas on the hard disk that stored the deleted file’s data are marked as free and
available for reuse, and may over time be overwritten by other data as other files are
created and written to the hard disk. The deleted file’s data, however, is still present
for an unpredictable amount of time after the file is deleted. Depending on the amount
of hard disk activity, this data may remain on the hard disk for a considerable period
of time.
By using special software and techniques, it is sometimes possible to read the data of
a deleted file from a hard disk, if it has not been overwritten by the data of other files.
This creates the possibility that an unauthorized person with the proper technical
knowledge could recover data from a sensitive file, even though the file has been
deleted.
On Xerox Phaser printers, the format of stored print jobs, discovered network
printers, and job accounting data on the printer’s disk is in a proprietary, unpublished
binary format. While this would prevent casual interpretation of the data, a person
with sufficient technical skills would probably be able to reverse-engineer the
structure and format of these files and interpret the data.
To address these security concerns, Xerox Phaser printers now support a Hard Drive
Overwrite Security software feature. This feature obliterates the data stored on the
hard disk of a file marked for deletion, before the file’s directory entry is removed
and its storage space on the hard disk is marked as available for reuse.
The obliteration of the data is accomplished by overwriting the entire area of the hard
disk that stores the data of the file to be deleted with a pattern of all ‘zero’ bits, then
all ‘one’ bits, then with a random pattern of bits.
This technique is described in the United States government industrial security
standard DoD 5200.28-M. This standard can be viewed at:
https://rimr.tatrc.org/DoD1.html . Xerox Phaser printers that support Hard Drive
Overwrite Security fully comply with this standard.
The Hard Drive Overwrite Security feature is not enabled by default. It can be
enabled from the printer’s front panel or from within the printer’s CentreWare IS
internal web server; see section 5 of this document for details on configuring security
features.
When the Hard Drive Overwrite Security option is enabled, the system command to
delete files in the printer’s operating system moves the files to be deleted from the
printer’s internal hard disk into a special directory, where they are processed by a
background task on the printer. This background task performs the Hard Drive
Overwrite Security process as described above, and then deletes the file directory
entry. This software design, by using a temporary folder, insures that the Hard Drive
Overwrite Security process will take place for every file, even if the printer is
restarted while the Hard Drive Overwrite Security is processing files.
When Hard Drive Overwrite Security is enabled, all files deleted from the printer’s
internal hard disk will be overwritten, regardless of the printer software controls or
commands that deleted it or what type of file it is. There are no exceptions to this
rule.

Xerox Phaser 7400 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	12 s
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Storage media	HDD
Internal memory	512 MB
Processor model	PowerPC
Maximum internal memory	1 MB
Internal storage capacity	20 GB
Total input capacity	800 sheets
Maximum input capacity	3000 sheets
Paper tray 2 input capacity	350 sheets
Auto document feeder (ADF) input capacity	1650 sheets
Maximum print size	297 x 420 mm
Paper tray media types	Envelopes, Labels, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
Maximum ISO A-series paper size	A3
Power requirements	100-240V, 50/60Hz
Networking features	Fast Ethernet
Supported media weight(s)	270 g/m²
Maximum operating temperature range (T-T)	10 - 32 °C
Certification	FCC p.15 A, CE
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-4 - 140 °F
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month

Weight and Dimensions

Dimensions (WxDxH)	1438 x 623 x 975 mm