HOW THE WORKCENTRE 7300 SERIES EXCEEDS THE PRODUCTIVITY REQUIREMENT:
5
WORKCENTR E 7 3 28/7335/7 3 4 5 /7346 EVA L UATOR GUIDE
EVALUATE PRODUCTIVITY
In addition to actual print engine speed, consider the things that affect overall throughput. Are the scanning
and faxing features powerful enough to support your busy departments? What is the warm-up wait time?
Is the device appropriately sized for the entire workgroup? Can features be used at the same time, or are
employees forced to wait for the device to become “free”? Is the system designed to minimize network
trafc? Can you monitor the device functions from your desktop and/or at the device?
PRODUCTIVITY
The productivity of the WorkCentre 7300 series starts with three output engine speed options,
delivering output speeds of up to 28 ppm black-and-white/26 ppm color, 35 ppm black-and-white/
31 ppm color, 45 ppm black-and-white/35 ppm color or 45 ppm black-and-white/40 ppm color. Doc-
ument scanning speed is notable as well, with a 75-sheet duplex automatic document feeder (DADF)
that scans single- and double-sided documents at 50 ipm black-and-white and 45 ipm color. With a
black-and-white rst-page-out time as fast as 4.8 seconds and a color rst-page-out time as fast as
6.7 seconds, you won’t have to wait long for your copy jobs either. The WorkCentre 7300 series also
features fast warm-up times of 30 seconds from low power mode and 45 seconds from cold start.
NETWORK PERFORMANCE
Performance isn’t limited to raw document feeds and speeds. The WorkCentre 7300 series network
controller utilizes a 667 MHz processor with up to 1.5 GB of memory and a minimum 40 GB hard
drive standard — it’s ready and able to process your large, complex print and scan jobs. In addition,
10/100Base-TX Ethernet connectivity comes standard for shared network printing, and optional
adapters for 10Base2, 10Base5, 802.11b wireless Ethernet, and USB ensure you can connect the
WorkCentre 7300 series to your company’s specic needs.
The WorkCentre 7300 series is easy on your network as well. With RAM collation, les are sent over
the network just once no matter how many sets are printed. Job pipelining allows the MFP to process
print jobs even if the print engine is busy with an earlier print job — thus optimizing system perfor-
mance by avoiding delays during job processing.
IMAGE QUALITY
With 600 x 600 dpi copy resolution and 1200 x 1200 dpi print resolution, the WorkCentre 7300
series generates high-quality copies and prints with crisp text and images. The WorkCentre 7300
series utilizes a number of advanced imaging technologies to deliver fast, reliable, high-quality
output, including:
• Xerox Emulsion Aggregate (EA) toner — this chemically grown toner technology features
smaller, more uniformly sized particles for excellent shadow detail, vibrant colors, consistent
color accuracy, and crisp ne-line detail.
• Trickle Charge Development — a Xerox-exclusive technology that maintains print
consistency throughout the workday by feeding a mixture of developer and toner to the
print engine, helping avoid eleventh-hour print-quality issues.
• Intermediate Belt Transfer with Micro Tandem Engine — provides the speed and efciency
of single-pass color with consistent image transfers, fewer paper jams, and increased uptime.
• Belt Nip Fusing — instead of conventional roller-to-roller contact, Belt Nip Fusing uses
a exible surface contact area that allows toner to better adhere to the media, delivering
improved image transfer and registration.
Xerox also delivers multiple page description languages (PDLs) to ensure your printed output meets
your high expectations, with Adobe
®
PostScript
®
3
™
, XPS
®
, emulations for PCL
®
5c, PCL 6 and HP-GL2
™
.
Traditional toner
particles
Chemically grown
EA-HG toner
To Next Page
Loading...
Need help?
General
