Troubleshooting
WorkCentre 7500 Series Multifunction Printer 229
User Guide
3. Remove any loose staples or other debris from inside the finisher.
4. Open the staple cartridge clamp by pulling firmly in the direction shown.
5. Remove the jammed staples (1), then push the clamp in the direction shown until it snaps into the
locked position (2).
WARNING: The points of the jammed staples are sharp. Remove the jammed staples carefully.
1
2
6. Grip the staple cartridge by the orange handle and insert the cartridge into the stapler until it clicks.
7. Close the finisher front cover.
To Next Page
Loading...
Need help?
General
