Troubleshooting
214 WorkCentre 7500 Series Multifunction Printer
User Guide
Clearing Jams in the Finisher Transport
1. Locate the handle on the right front of the center tray.
2. Lift the handle of the center tray straight up to open the transport cover.
3. Remove the jammed paper.
Note: If the paper is torn, remove all torn pieces from the finisher.
4. Close the transport cover.
Clearing Jams in the Professional Finisher
Clearing Jams in the Center Tray
1. If the paper is jammed at the exit to the center output tray, pull the paper in the direction shown.
To Next Page
Loading...
Need help?
General
