Xerox WorkCentre 7500 Series User Manual

Troubleshooting
232 WorkCentre 7500 Series Multifunction Printer
User Guide
WARNING: Do not perform this procedure while the printer is copying or printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening and
slide them to the center.
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4. Remove the jammed staples by pulling them in the direction shown.

Xerox WorkCentre 7500 Series Specifications

General

Brand	Xerox
Model	WorkCentre 7500 Series
Category	All in One Printer
Language	English