Xerox WORKCENTRE 7775 - Page 5

Xerox
®
WorkCentre
®
7775
Detailed Specifications 5
Output Option – Light Production Finisher
Capacity
1
Top Tray: 500 sheets
Lower Tray: 2,000 sheets 20 lb bond 8.5 x 11 in. size (75 gsm, A4/210 x 297 mm)
Sizes 4 x 6 in. SEF to 13 x 19 in. SEF (101.6 x 152.4 mm to 330.0 x 482.6 mm)
Weights 17 lb bond to 170 lb index (64 to 300 gsm)
Stapling
1
Up to 100 sheets 20 lb bond (75 gsm)
Hole Punch North America
2-3 Hole Punch
Europe
2-4 Hole Punch
Swedish 4-Hole Punch (Optional)
Booklet Maker
Capacity
1
Bi-folded booklets (5 sheets maximum)
Saddle-stitched and Center folded booklets (15 sheet maximum)
Post Process Interposer 200 sheet capacity
Output Option – Convenience Stapler
Capacity
1
50-sheet stapling
5,000 staples
Requires a separate outlet
Print Specifications
Network Printing – Smart Controller (Simultaneous rip, receive, program ahead, queue processing and transmit)
Processor 1.33 GHz Freescale
Memory (ESS) 2 GB
System Disk 160 GB minimum
Print Languages (PDL) PCL 6 / PCL 5e emulation
Adobe
®
PostScript
®
3™
TIFF (6.0 Old JPEG and New JPEG)
TIFF Fax Extended (TIFF - FX)
PDF
LCDS, SCS, XES and IPDS through 3rd-party transforms
Network Printing – Resolution (printing via CentreWare
®
software)
PostScript: 600 x 600 dpi and 1200 x 1200 dpi (up to 256 shades of gray)
PCL: 600 x 600 dpi
Supports PCL and PS switching within job
Network Printing – Printing Features
Bi-directional Print Drivers provide device and job status
Embedded Web server for remote control/monitor/setup
Job monitoring at the device and at desktop
Special font
Banner Sheet
Rotate Image
Offset
Support PCL and PS switching
Custom Macintosh Driver (Watermark, Booklet Creation, JBA, Secure, Sample, Delay Print)
Support for Print on Tabs / Page Segmentation
Linearized PDF
Save and restore print job settings
1
Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks.