5-17
Disassembly and Reassembly
Service Manual
5.16 Pick Up Roller & Solenoid
1. Before you remove the Pick Up Roller and Solenoid
you should remove:
- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)
- Scanner Ass’y (see page 5-4)
- Middle Cover (see page 5-6)
- LSU (see page 5-9)
- Drive Ass’y (see page 5-10)
- Feed Bracket and Gears (See page 5-14 steps 4 - 6)
2. Remove the Pick up Gear Ass’y, as shown below.
3. Remove the Pick up Ass’y, as shown below.
4. Remove 2 screws then remove the Regi Solenoid and
Pick Up Solenoid.
To Next Page
Loading...
